New method for measuring magnetoelectric effect in pulsed magnetic fields
A new measurement method for magnetoelectric effect in pulsed magnetic fields has been developed. The pulsed field system generates in a bore of 25 mm fields up to 10.0 T with a typical pulse duration of 20 ms. Besides the magnetization, the system allows the measurement of the magnetoelectric effec...
Збережено в:
| Дата: | 2006 |
|---|---|
| Автори: | , , , , , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
НТК «Інститут монокристалів» НАН України
2006
|
| Назва видання: | Functional Materials |
| Онлайн доступ: | http://dspace.nbuv.gov.ua/handle/123456789/144370 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | New method for measuring magnetoelectric effect in pulsed magnetic fields / E.D. Bueno-Baques, J. Matutes-Aquino, V. Corral-Flores, M. Botello-Zubiate, D. Rios-Jara, R. Grossinger // Functional Materials. — 2006. — Т. 13, № 2. — С. 283-287. — Бібліогр.: 9 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| Резюме: | A new measurement method for magnetoelectric effect in pulsed magnetic fields has been developed. The pulsed field system generates in a bore of 25 mm fields up to 10.0 T with a typical pulse duration of 20 ms. Besides the magnetization, the system allows the measurement of the magnetoelectric effect in both transversal and longitudinal modes. The magnetoelectric effect on well known cobalt ferrite/ barium titanate composites and single-phase materials was measured as a function of the temperature. A maximum magnetoelectric coefficient of 1.5 mV/(cm•Oe) was obtained for a composite with a composition of 50 mass % ferrite sintered at 1200 °C. A model to explain the results obtained by this measurement method is discussed. |
|---|