Effect of physical and mechanical properties of diamond synthesized in the presence of ferroalloys, to wear resistance rock cutting tool

Effect of physical and mechanical properties of diamond synthesized in the presence of ferroalloys, to wear resistance rock cutting tool

Gespeichert in:

Bibliographische Detailangaben
Datum:	2016
Hauptverfasser:	N. V. Novikov, G. D. Ilnitskaja, A. M. Isonkin, I. N. Zajtseva, Ju. P. Ushchapovskij, G. S. Grishchenko
Format:	Artikel
Sprache:	English
Veröffentlicht:	2016
Schriftenreihe:	Tooling materials science
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000713022
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Improving the physical and mechanical properties of synthetic diamond powders synthesized using ferroalloys to increase the wear resistance of the diamond ruling tool
von: T. O. Prikhna, et al.
Veröffentlicht: (2022)

Investigation of the indenter penetration zone in the wear particle of the matrix of a diamond-containing rock-cutting tool
von: O. P. Vynohradova, et al.
Veröffentlicht: (2024)

Character of wear of synthetic diamonds differentstrength in impregnated drill bits
von: A. M. Isonkin, et al.
Veröffentlicht: (2018)

Influence of the uniformity of synthetic diamond grits on the drilling tool performance
von: N. V. Novikov, et al.
Veröffentlicht: (2012)

The effect of titanium and tungsten coating the surface of diamond monocrystals on the wear resistance of rock-cutting elements made from them
von: O. O. Bochechka, et al.
Veröffentlicht: (2019)

The influence of physical_mechanical characteristics of AS6 synthetic diamond powders on wear resistance of grinding tools
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2013)

Size separation of diamond nanopowders synthesized by detonation
von: G. P. Bogatyrjova, et al.
Veröffentlicht: (2012)

Influence of diamond defects on workability drill bits
von: A. M. Isonkin, et al.
Veröffentlicht: (2017)

Physico-mechanical and operational characteristics of synthetic diamond powders, synthesized with the use of Ni–Mn and Fe–Si carbon solvents
von: G. D. Ilnitskaja, et al.
Veröffentlicht: (2019)

Influence of physicomechanical and physicochemical characteristics of synthetic diamonds AC20 100/80 after separation in magnetic and electric fields on wear-resistance of the grinding tool
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2018)

Formation of diamond-carbide granules to be used in rock destruction tools
von: N. V. Novikov, et al.
Veröffentlicht: (2012)

The impact of frictional interaction when cutting became the diamond wheel on wear of polycrystals of diamond
von: A. M. Kuzej, et al.
Veröffentlicht: (2019)

Reinforcement of rock cutting tool by large synthetic monocrystal
von: M. S. Popova
Veröffentlicht: (2019)

Influence of macrostructure of diamond-containing composite materials on cutting capacity of the tool
von: A. M. Kuzej, et al.
Veröffentlicht: (2018)

Intensity of wear of functional elements made of diamond-containing composite materials during the operation of tools in the process of rock destruction
von: A. L. Maistrenko, et al.
Veröffentlicht: (2023)

Researches on the effect of different factors on the results of the interaction between rock-cutting tool and rock and decision-making
von: G. M. Efendiev, et al.
Veröffentlicht: (2016)

Drilling carbide rock cutting tool of a new type
von: A. A. Kozhevnikov, et al.
Veröffentlicht: (2016)

Investigation of changes in physico-mechanical and physical-chemical properties of diamond diamond systems of the Ni-Mn-C system for increasing the operating characteristics of the grinding tool
von: G. D. Ilnitskaja, et al.
Veröffentlicht: (2017)

Influence of durability of synthetic diamonds on efficiency of destruction of mountain rock drill bits
von: A. M. Isonkin
Veröffentlicht: (2016)

Resource-saving issues when recovering diamond particles from rock sludge, which was formed during the operation of the diamond drilling and stone-working tool
von: N. A. Olejnik, et al.
Veröffentlicht: (2019)

The mechanism of wearing of cutting tools based on cBN for precision wear-resistant high-chromium pig-iron
von: K. O. Diadiura, et al.
Veröffentlicht: (2015)

Effective rock cutting tool for drilling small diameter for oil and gas
von: Ju. E. Budjukov, et al.
Veröffentlicht: (2016)

Effect of thermodynamic cyclic loads for high-strength diamond wear mechanism destroying mountain breed
von: A. M. Isonkin, et al.
Veröffentlicht: (2019)

Forecasting the physical and chemical and thermophysical properties of nickel-containing ferroalloys
von: A. F. Petrov, et al.
Veröffentlicht: (2018)

Efficiency of the use of diamond drilling bits with a different intensity of the destruction of the mountain rocks
von: A. M. Isonkin
Veröffentlicht: (2017)

Wear resistance of diamond-dolomite and diamond-strontium carbonate composites produced under HPHT-conditions
von: N. A. Bondarenko, et al.
Veröffentlicht: (2018)

Use engraving machines new generation for studies of wear diamonds in the destruction of rocks
von: A. I. Vdovichenko, et al.
Veröffentlicht: (2016)

Study on cutting performance and tool wear of micro-textured tool for milling Ti6Al4V
von: Shen Xiang-yu, et al.
Veröffentlicht: (2017)

Prediction of the melting time of complex ferroalloys by the method of physical and chemical modeling
von: A. F. Petrov, et al.
Veröffentlicht: (2019)

Composite and polycrystalline powder materials of synthetic and natural diamonds, cubic boron nitride and boron carbide. A comparative study of forms of projection and the characteristics of the cutting edges of grains powder for grinding tools
von: V. G. Poltoratskij, et al.
Veröffentlicht: (2016)

Study of the effect of the wear of a cutting tool from cBN-based composite on the probability of the tool fracture in finish turning of hardened steels
von: L. N. Devin, et al.
Veröffentlicht: (2012)

Intellectual System of Refusals Diagnosing and Cutting Part of Cutting Tools Renewal
von: A. G. Derevjanchenko
Veröffentlicht: (2013)

On the interaction of the detonation-synthesized ultradisperse diamond and turbostratic boron nitride
von: G. S. Olejnik, et al.
Veröffentlicht: (2017)

Peculiarities of glucose oxidase adsorption by mesoporous aluminosilicates synthesized in presence of biotemplates
von: Smelaya, Z.V., et al.
Veröffentlicht: (2002)

The intensity of wearing of rock-breaking elements from diamond-containing materials in dependens of chemical composition and a method of diamond coating
von: A. L. Maistrenko, et al.
Veröffentlicht: (2017)

Temperature dependence of microhardness of composites based on diamond nanopowder synthesized by detonation
von: A. A. Bochechka, et al.
Veröffentlicht: (2012)

The software tool of constructive-synthesizing modeling
von: Shynkarenko, V.I., et al.
Veröffentlicht: (2024)

Predictive evaluation of physical and chemical properties of new compositions of chromium-containing ferroalloys
von: O. P. Petrov, et al.
Veröffentlicht: (2022)

Justification of the wear – out rate of drilling tool by the nature of destruction of matrix of diamond – composit material
von: O. P. Vynohradova, et al.
Veröffentlicht: (2016)

Analysis of cutting edge wear during drilling composite materials
von: L. N. Devin, et al.
Veröffentlicht: (2017)