Normal mode of dc discharge in argon, hydrogen and oxygen

This paper reports the current-voltage characteristics and the j/p²similarity parameter determination in argon, hydrogen and oxygen in the pressure range from 0.1 to 10 Torr. Experiments have been performed in the discharge tube of 56 mm inner diameter and with stainless steel electrodes. Anode diam...

Повний опис

Збережено в:
Бібліографічні деталі
Дата:2016
Автори: Lisovskiy, V.A., Artushenko, K.P., Yegorenkov, V.D.
Формат: Стаття
Мова:English
Опубліковано: Національний науковий центр «Харківський фізико-технічний інститут» НАН України 2016
Назва видання:Вопросы атомной науки и техники
Теми:
Онлайн доступ:http://dspace.nbuv.gov.ua/handle/123456789/115434
Теги: Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
Назва журналу:Digital Library of Periodicals of National Academy of Sciences of Ukraine
Цитувати:Normal mode of dc discharge in argon, hydrogen and oxygen / V.A. Lisovskiy, K.P. Artushenko, V.D. Yegorenkov // Вопросы атомной науки и техники. — 2016. — № 6. — С. 223-226. — Бібліогр.: 21 назв. — англ.

Репозитарії

Digital Library of Periodicals of National Academy of Sciences of Ukraine
Опис
Резюме:This paper reports the current-voltage characteristics and the j/p²similarity parameter determination in argon, hydrogen and oxygen in the pressure range from 0.1 to 10 Torr. Experiments have been performed in the discharge tube of 56 mm inner diameter and with stainless steel electrodes. Anode diameter was 55 mm whereas the diameters of the cathodes employed were 55 and 12 mm. The j/² parameter has been shown to remain constant only at the gas pressure above 1 Torr. Its values comprise j/p²= (0.092 ±0.02) mA/(cm² ∙Torr² ) for argon, j/p²= (0.072 ±0.02) mA/(cm² ∙Torr² ) for hydrogen and j/p ² = (0.33 ±0.05) mA/(cm² ∙Torr² ) for oxygen. On lowering the pressure (below 1 Torr) the j/p²parameter grows fast and at the pressure of 0.1 Torr it may be two orders of magnitude higher than one at 1 Torr.