Estimation of technological possibilities of the speed stabilization of casting by open jet on modern billet continuous casting machine (CCM). Report 2.

Estimation of technological possibilities of the speed stabilization of casting by open jet on modern billet continuous casting machine (CCM). Report 2.

Gespeichert in:

Bibliographische Detailangaben
Datum:	2018
Hauptverfasser:	S. N. Pisarskij, A. N. Smirnov, D. A. Lavrenko, D. V. Rjabyj
Format:	Artikel
Sprache:	English
Veröffentlicht:	2018
Schriftenreihe:	Metal and casting of Ukraine
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000991797
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Estimation of technological possibilities of the speed stabilization of casting by open jet on modern billet CCM. Report 1
von: S. N. Pisarskij, et al.
Veröffentlicht: (2018)

Features of the Occurrence of Starting Fans in the Continuous Casting of Billets by Open Jet
von: A. N. Smirnov, et al.
Veröffentlicht: (2019)

Estimation of hydrodynamic factors for increasing the efficiency of the steel casting at the multistrand billet ccm
von: S. N. Pisarskij, et al.
Veröffentlicht: (2018)

Causes of fracture and methods of hardening of copper plates of moulds of machines of continuous casting of billets
von: V. G. Kozhemjakin, et al.
Veröffentlicht: (2014)

Calculation of penetration zone dimensions in surfacing of rolls of machines for continuous casting of billets
von: V. N. Matvienko, et al.
Veröffentlicht: (2018)

Effect of surfacing on stress-strain state of rollers of machines for continuous casting of billets
von: A. P. Gopkalo, et al.
Veröffentlicht: (2015)

Continuous casting machine of DMZ – an important historical event in development of the continuous casting process
von: D. A. Djudkin
Veröffentlicht: (2011)

Technology of restoration repair of slab moulds of machines for continuous casting of billets by friction stir surfacing
von: Ju. N. Nikitjuk, et al.
Veröffentlicht: (2013)

Alloying of surface layer of cast billet at casting
von: V. I. Tsotsko, et al.
Veröffentlicht: (2009)

Modern methods of organizing directionsstreams in the tundish continuous casting machine
von: A. N. Smirnov, et al.
Veröffentlicht: (2017)

Control of press-plunger speed in die-casting machine
von: V. S. Bogushevskij, et al.
Veröffentlicht: (2013)

Increase in quality of continuously cast billet of low-carbon peritectic steel
von: T. V. Horiainova
Veröffentlicht: (2012)

Features of structure formation of the tubular billets manufactured of the ingot and continuously casted
von: H. V. Levchenko, et al.
Veröffentlicht: (2011)

Investigation of the unevenness of mechanical properties along the cross-section of continuously cast billets
von: D. H. Palamar, et al.
Veröffentlicht: (2018)

Box-groove elements effect on the deformation penetration in the central zone of continuous casting billet
von: D. G. Palamar
Veröffentlicht: (2013)

Hollow-section machine-building billets, made by centrifugal electroslag casting manufacturing perspectives
von: S. V. Skripnik, et al.
Veröffentlicht: (2011)

Thermal stresses in two-layer rollers for continuous billet casting machines under variation of the base and cladding metals properties
von: A. P. Gopkalo, et al.
Veröffentlicht: (2011)

The study of modern concepts about the nature of deposits in refractories during casting of steel. Report 2
von: S. N. Pisarskij, et al.
Veröffentlicht: (2019)

Regulatory provision of creep definition of continuous cast billets from copper alloys
von: Павлова, Анна Алексеевна, et al.
Veröffentlicht: (2014)

Prospects for improving the quality of railway wheels made of a continuous casted billet
von: A. I. Babachenko, et al.
Veröffentlicht: (2013)

Regulatory provision of creep definition of continuous cast billets from copper alloys
von: O. N. Khoroshilov, et al.
Veröffentlicht: (2013)

Regulatory provision of creep definition of continuous cast billets from copper alloys
von: Павлова, Анна Алексеевна, et al.
Veröffentlicht: (2014)

Obtaining of combined hardening coatings of copper molds of mashines for continuous-casting of billets
von: Paustovsky, A.V., et al.
Veröffentlicht: (2019)

Quality of low-carbon rod produced from billets and bloom continuous castings
von: G. V. Levchenko, et al.
Veröffentlicht: (2017)

Selection of the optimum conditions of heatremoval with the lateralsurface of the billet continuous casting in secondary coolingzone
von: N. I. Tarasevich, et al.
Veröffentlicht: (2014)

Structure and properties of hot-rolled boiler tubes made from continuously cast billets
von: L. V. Opryshko, et al.
Veröffentlicht: (2016)

Optimization of tundish box work in tundish high productivity 7-Strands billet CCM
von: O. M. Smirnov, et al.
Veröffentlicht: (2015)

Strain state continuous ingot liquid core in the curved continuous casting machine
von: V. M. Poleshchuk, et al.
Veröffentlicht: (2015)

Method of Optimization Thermal Operating of the Mould in Continuous Casting Machine
von: A. S. Nuradinov, et al.
Veröffentlicht: (2016)

Study of the processes of shaping the hollow billets from antifriction alloys by the centrifugal and continuous casting methods
von: Khoroshylov, O.M., et al.
Veröffentlicht: (2019)

Hereditary relationship of dendritic and grain structure of continuously cast billets made of medium-carbon steel
von: G. V. Levchenko, et al.
Veröffentlicht: (2017)

Study of the processes of shaping the hollow billets from antifriction alloys by the centrifugal and continuous casting methods
von: O. M. Khoroshylov, et al.
Veröffentlicht: (2019)

The influence of the cooling regime and chemical composition on dendritic structure formation of the ingot and continuous cast billets
von: O. I. Babachenko, et al.
Veröffentlicht: (2015)

Dynamic cooling control continuous casting in transient modes of casting in the metallurgical micromills
von: A. N. Smirnov, et al.
Veröffentlicht: (2016)

The impact of vibrating and gas-impulsive Treatment of solidifying metal on hydrodynamic processes of formation of Continuous-Cast billets
von: A. S. Nuradinov, et al.
Veröffentlicht: (2014)

Advanced technology for continuous casting of steel: opportunities and challenges
von: A. N. Smirnov
Veröffentlicht: (2014)

Application of Electromagnetic Forces in Continuous Steel Casting
von: V. I. Dubodelov, et al.
Veröffentlicht: (2019)

Investigation of the Influence of the Inner Diameter and the Depth of Placement of the Sen in the Mold of Radial Billet CCM
von: O. P. Verzilov, et al.
Veröffentlicht: (2020)

Intensification of internal and external heat sink at the manufacture of cast billets in molds with different properties. Report 2
von: V. A. Mamishev, et al.
Veröffentlicht: (2018)

Features of heat-resistant properties of metal of not-rolled boilertubes produced from continuously cast billets of steel 20
von: L. V. Opryshko, et al.
Veröffentlicht: (2020)