$Causes of fracture and methods of hardening of copper plates of moulds of machines of continuous casting of billets$

Causes of fracture and methods of hardening of copper plates of moulds of machines of continuous casting of billets

Gespeichert in:

Bibliographische Detailangaben
Datum:	2014
Hauptverfasser:	V. G. Kozhemjakin, V. A. Shapovalov, V. R. Burnashev, D. M. Zhirov, D. V. Botvinko
Format:	Artikel
Sprache:	English
Veröffentlicht:	2014
Schriftenreihe:	Electrometallurgy Today
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000474068
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Restoration of surface layer of MCCB mould copper plate by using plasma-arc technology
von: V. G. Kozhemjakin, et al.
Veröffentlicht: (2015)

Effect of technological parameters on sizes of molten metal pool in plasma-arc surfacing of copper plates of MCCB moulds
von: V. G. Kozhemjakin, et al.
Veröffentlicht: (2015)

Strengthening the surface layer of CCM mould copper plates by hafnium with application of plasma-arc technology
von: V. G. Kozhemjakin, et al.
Veröffentlicht: (2015)

Alloying of surface layer of mould copper plates by the method of plasma-arc remelting
von: V. G. Kozhemjakin, et al.
Veröffentlicht: (2017)

Obtaining of combined hardening coatings of copper molds of mashines for continuous-casting of billets
von: Paustovsky, A.V., et al.
Veröffentlicht: (2019)

Plasma-arc remelting of billets compacted from chips of austenitic stainless steels
von: V. R. Burnashev, et al.
Veröffentlicht: (2014)

Technology of restoration repair of slab moulds of machines for continuous casting of billets by friction stir surfacing
von: Ju. N. Nikitjuk, et al.
Veröffentlicht: (2013)

Investigation of quality of restored and alloyed surface layers of copper plates in PARS
von: V. G. Kozhemjakin, et al.
Veröffentlicht: (2015)

Simulation of solid shell deformation conditions in the billet continuous casters mould
von: A. N. Smirnov, et al.
Veröffentlicht: (2009)

Method of Optimization Thermal Operating of the Mould in Continuous Casting Machine
von: A. S. Nuradinov, et al.
Veröffentlicht: (2016)

Effect of surfacing on stress-strain state of rollers of machines for continuous casting of billets
von: A. P. Gopkalo, et al.
Veröffentlicht: (2015)

Regulatory provision of creep definition of continuous cast billets from copper alloys
von: Павлова, Анна Алексеевна, et al.
Veröffentlicht: (2014)

Regulatory provision of creep definition of continuous cast billets from copper alloys
von: Павлова, Анна Алексеевна, et al.
Veröffentlicht: (2014)

Regulatory provision of creep definition of continuous cast billets from copper alloys
von: O. N. Khoroshilov, et al.
Veröffentlicht: (2013)

Calculation of penetration zone dimensions in surfacing of rolls of machines for continuous casting of billets
von: V. N. Matvienko, et al.
Veröffentlicht: (2018)

Application of friction stir welding method for repair and restoration of worn-out copper plates of MCCB moulds
von: G. M. Grigorenko, et al.
Veröffentlicht: (2015)

Producing of rapidly hardened alloys by the method of dispersion during induction melting in a sectional mould
von: V. A. Shapovalov, et al.
Veröffentlicht: (2009)

Behavior of gas impurities in plasma-arc remelting of billet compacted of chips of austenitic stainless steels
von: V. A. Shapovalov, et al.
Veröffentlicht: (2012)

Possibility of preserving shape and sizes of cylindrical tubular billets of moulds in explosion cladding
von: Ju. P. Meshcherjakov, et al.
Veröffentlicht: (2009)

Application of non-conducting consumable billets at electroslag surfacing in current-supplying mould
von: Ju. M. Kuskov, et al.
Veröffentlicht: (2018)

Peculiarities of recycling of high-alloy light-weight metal wastes
von: D. V. Botvinko, et al.
Veröffentlicht: (2015)

Uprating the Uniformity of the Hardness Distribution within the Powder Billets Moulded with the Shifts of Layers
von: S. N. Grigorev, et al.
Veröffentlicht: (2013)

Estimation of technological possibilities of the speed stabilization of casting by open jet on modern billet continuous casting machine (CCM). Report 2.
von: S. N. Pisarskij, et al.
Veröffentlicht: (2018)

Thermal stresses in two-layer rollers for continuous billet casting machines under variation of the base and cladding metals properties
von: A. P. Gopkalo, et al.
Veröffentlicht: (2011)

Autovacuum brazing in repair of copper panels of MCCB moulds
von: G. M. Grigorenko, et al.
Veröffentlicht: (2015)

Cooled moulds for ingots formation with electromagnetic effect on melt
von: I. V. Shejko, et al.
Veröffentlicht: (2011)

Features of the Occurrence of Starting Fans in the Continuous Casting of Billets by Open Jet
von: A. N. Smirnov, et al.
Veröffentlicht: (2019)

Melting of copper master alloys with highly-reactive metals under conditions of plasma-arc skull melting
von: V. G. Kozhemjakin, et al.
Veröffentlicht: (2016)

Investigation of the unevenness of mechanical properties along the cross-section of continuously cast billets
von: D. H. Palamar, et al.
Veröffentlicht: (2018)

Increase in quality of continuously cast billet of low-carbon peritectic steel
von: T. V. Horiainova
Veröffentlicht: (2012)

Features of structure formation of the tubular billets manufactured of the ingot and continuously casted
von: H. V. Levchenko, et al.
Veröffentlicht: (2011)

Hollow-section machine-building billets, made by centrifugal electroslag casting manufacturing perspectives
von: S. V. Skripnik, et al.
Veröffentlicht: (2011)

Changes in Structure and Regularities of Copper Hardening under Screw Extrusion
von: V. N. Varjukhin, et al.
Veröffentlicht: (2013)

Plasma-arc melting on dispersed substrate in mobile horizontal mould
von: V. N. Koleda, et al.
Veröffentlicht: (2012)

Plasma-arc remelting of billet, compacted of EP609-Sh steel chips
von: V. A. Shapovalov, et al.
Veröffentlicht: (2011)

Box-groove elements effect on the deformation penetration in the central zone of continuous casting billet
von: D. G. Palamar
Veröffentlicht: (2013)

Quality of low-carbon rod produced from billets and bloom continuous castings
von: G. V. Levchenko, et al.
Veröffentlicht: (2017)

Deposition of protective coatings on copper panels of MCCB moulds by autovacuum brazing method
von: M. A. Poleshchuk, et al.
Veröffentlicht: (2016)

Pecularities of kinetics of delayed fracture of welded joints of hardening steels
von: Ju. Skulskij
Veröffentlicht: (2009)

Prospects for improving the quality of railway wheels made of a continuous casted billet
von: A. I. Babachenko, et al.
Veröffentlicht: (2013)